Shenzhen Mealink Electronic Co., Limited  

Product Name: 4X4 Mixed Inputs HDMI Seamless Matrix (IR, RS232, TCP/IP) Model NO.: YL-0404MX Certification: CE, RoHS Function: Signal Transmitting Device Type: TV Front-end Equipment OEM: Avaliable Warranty: 1 Year Free Warranty Trademark: Mealink Transport Package: Gift Box Packing Specification: CE, FCC, RoHS Approval Origin: Shenzhen, China Product Description The 4x4 Mixed Inputs HDMI Seamless Matrix(IR,RS232,TCP/IP) is a high-performance with seamless switching output and mixed input 4x4 matrix switcher,4 mixed input to support digital video signals and analog video signal,and 4 outputs with seamless switching function,seamless switching mode: fast switching,fade in/fade out, blinds and so on;the mixing matrix switcher adopts the advanced digital technology,with scaler function,and achieve a variety of formats to achieve a unified output signal,switching seamlessly perfect visual effects.At the same time it with infrared matrix function,analog video signal input with embedded audio function.Flexible control mode diversity,through the front panel button,remote control,RS-232 and TCP/IP control.Featurers:1.Compliant HDMI1.3, HDCP1.3 and DVI1.02. Input video supports HDMI, VGA and C-video3.Supports input resolutions :HDMI: 480i to 1080p4. VGA:1920 x 1080P@60Hz, 1360 x 768P@60Hz, 1280 x 1024P@60Hz, 1024 x 768P@60Hz, 1280 x 720P@60Hz,1280 x 768P@60Hz, 800 x 600@60Hz, 640 x 480P@60Hz, 720 x 400P@85Hz5. CV: Supports PAL, NTSC3.58, NTSC4.43, SECAM, PAL/M, PAL/N standard TV formats6.Supports output resolutions :1920x1080P@60Hz7.Supports seamless switching output,optional seamless switching mode:fast switching,fade in/fade out,blinds and so on8.The RS-232 for the firmware update9.Supports RS-232, remote control, on-panel control and TCP/IP Control10.Supports smart EDID management11.Picture Adjustment Settings12.Automatically adjust the VGA input video13.Supports power-off memoryPackage Contents:1. HDMI 4 x4 mixed inputs seamless matrix switcher 1pcs2. 12V/2.5A DC power adaptor 1pcs3. Operation Manual 1pcs4. Wideband IR Tx cable 4pcs5.Wideband IR Rx cable 5pcs6.Mixed Matrix IR Remote 1pcs7.Mounting ears 2pcs8.RS232 cable 1pcsSpecifications:Input Ports 4×HDMI,4xVGA, 4xRCA ,1×RS-232, 1xRJ-45(Control),5×IR Receiver, 4xAudioOutput Ports 4×HDMIInput Resolutions Support Up to 1920x1080P@60HzOutput Resolutions Support Up to 1920x1080P@60HzControl IR , RS-232 , TCP/TP , ButtonsESD Protection Human-body Model: ± 8kV (Air-gap discharge) ± 4kV (Contact discharge)Power Supply 12 V/2.5 A DC (US/EU standards)Dimensions 440mm (W)×200mm (D)×44.5mm (H)Weight 2380 gChassis Material metalSilkscreen Color BlackOperating Temperature 0 ºC~40 ºC/32 ºF~104 ºFStorage Temperature ?20 ºC~60 ºC/?4 ºF~140 ºFRelative Humidity 20~90 % RH (non-condensing)Power Consumption 13.5 W(Max)/1.2W(Standby)PANEL FUNCTIONS:Front PanelPart 1. LCM: Displays the information of each input and output setting and EDID management .Part 2. IR: IR Receiver window (accepts the remote control signal of this device only). POWER: Press this button to power the device on/off. The LED will illuminate green when the power is on, red when it is in 'Standby' mode. LOCK: Press this button to lock all the buttons on the panel, press again to unlock.Part 3. OUTPUT/INPUT: Press the OUTPUT and INPUT button to select the output corresponding input.For example: Press OUPUT ALL>INPUT 1, The OUTPUT A,B,C,D will be set to INPUT 1.Part 4. Picture adjust:Press the button to adjust the output picture.For example:Press output 1>SCALER, The output 1 video will be scaler adjust.Note:1.The first output signal source must be VGA input source.2.Scaler adjust the step: six stepsPart 5. Sources input select: Press the button to select source input.For example:Press input 1>VGA,The input 1 will be select the VGA video input.Part 6. EDID: Smart EDID management,the LCM will display the EDID operation.Press the MENU button will enter the EDID management window, press UP or DOWN button to select the needed EDID settting, press ENTER button to select the download input source.it can easy download any EDID mode to any input source.Note: The EDID mode tableEDID ModeEDID Description11080i, 2CH AUDIO21080p, 2CH AUDIO3DVI 1920x1080EDID. What is it and what is it used for?Under normal circumstances, a source device (digital and analog) will require information about a connected device/display to assess what resolutions and features are available. The source can then cater its output to send only resolutions and features that are compatible with the attached device/display. This information is called EDID (Extended Display Information Data)and a source device can only accept and read one EDID from a connected device/display. Likewise, the source an only output one resolution for use by a connected device/display.Why is EDID so important with the HDMI Matrix ?The Matrix is complex piece of technology that replicates and switches between multiple inputs and outputs. Each connected source device will require one EDID to read. EDID management is carefully handled by HDMI Matrix to provide a single EDID for each source to read.What options do I have to manage the EDID in the HDMI Matrix ?First, it is important to note that each source device can only output one video/audio signal type. This includes resolutions and timings. When multiple devices/displays are used, such as with the HDMI Matrix, it is important to use devices/displays that have similar or compatible resolutions/features. This will ensure that the single video/audio signal produced by the source device is accepted by all of the connected output devices/displays.The user has the option, through the EDID management window, to choose how the unit will manage the EDID from multiple HDMI devices/displays. Therefore the user has some control over the resolutions/features that the source devices will output. The HDMI Matrix for has a multiple EDID management modes that will control how the EDID information from multiple devices/displays are combined, ignored, and routed.Rear PanelPart1: IR ChannelIR EXT: if the panel sensor is obstructed or the unit is installed in a closed area out of infrared line of sight,the IR RX receiver included can be inserted into the IR EXT port at the rear to extend the IR sensor range and enable local control of the matrix.IR IN/OUT: Super IR control system interface. for further details, please refer to the Super IR system control introduction.Part2: VGA CV AND AUDIO INPUTConnect to the VGA or CV input source devices such as a DVD player, a Set-top Box or PC with VGA cable or RCA coaxial cable.Each VGA or CV input is accompanied with a 3.5mm stereo audio input.Part 3: PC CONTROLTCP/IP: This port is the link for TCP/IP controls, connect to an active Ethernet link with an RJ45 terminated cable.RS232: Connect to a PC or control system with D-Sub 9-pin cable for the transmission of RS-232 commands.Part4: OUTPUTThe HDMI OUTPUT connect to HDMI equipped TVs.Part5: HDMI INPUTConnect to the HDMI input source devices such as a DVD player or a Set-top Box with HDMI cable.Part6: DC POWER INPUTPlug the 12V/2.5A DC power supply into the DC12V power in.Remote Control(1). Press this button to power on the matrix or set it to standby mode.(2).Output selection.Letters correspond with the outputs on the matrix.(3).Input selection.Numbers correspond with the inputs on the matrix.(4).Sources input selection.Press the button to select source input. For example:Press input 1>VGA,The input 1 will be select the VGA video input.(5).Picture adjust.Press the button to adjust the output picture.For example:Press output 1>SCALER,The output 1 video will be scaler adjust.Note:The output signal source must be VGA input source.IR Control systemAt Matrix end: Insert the 3.5mm jacks of the IR TX Emitters included with the unit into the IR TX Emitter ports at the rear of the matrix according to input. The IR signal is added to the HDMI of the input device so, for example, if the user is watching Blu-ray on input 1, the IR signal will be directed through the IR TX1 socket to control the device.As each IR TX port is allocated to an individual HDMI input port, if the user is unable to establish IR control of the device, care should be taken to check firstly, that the IR emitter and HDMI input ports match (Input 1-TX1, Input2-TX2 etc.) with plugs secured in correct ports, and secondly, that the IR TX emitter sensors are firmly attached directly to the front of inputs and covering infrared sensor windows of the source devices.Some later adjustment may be needed to the location of the sensor to achieve the best performance results - sometimes moving the sensor to different areas on the source can improve IR performance.NOTE: Infrared receiving areas of devices can be located by shining a flashlight onto the front of the device - the sensor should be able to be seen through the plastic as a small, round object inside.Insert 3.5mm jacks of IR RX receivers into RX ports, making sure the receivers themselves are placed in clear view to receive an infrared signal from the remote handset used to control the display outputs.PC controller user guideInstallationMatrix controller is a green software. Just copy MatrixController.exe to PC which is used to control the Matrix by RS232 COM port or TCP/IP to complete installation.PreparationConnect PC and Matrix by RS232 cable (headers of both sides of cable should be FEMALE) or TCP/IP(local area network)Power-up MatrixDouble click MatirxController.exe icon to run itHow to control Matrix"General" pageSelect RS232 COM or TCP modeSelect RS232 COM portClick to connect or disconnect PC and MatrixSelect Matrix IPConnect to Matrix IPSearch Matrix IPConfigure Matrix IP and MACClick to reset to the factory settingsDevice information display areaClick to refresh device status: include device information displayed in 9 area and Input/Output Settings on "Matrix" pageClick to clear device informationEnable or disable BeepConfigure TCPAfter action of 7 , edit form will pop-up as below:Select auto or static IPRewrite the Matrix IPRewrite the Matrix MAC"EDID control" pageSelect the needed EDID to input port and click set button the EDID will write to the selected HDMI input ports."Matrix" pageLED which display Input number for respective OutputClick to select Input port for respective Output portClick to select previous or next Input port for respective Output portClick to select the seamless switching output modeClick to select the seamless switching timeClick to automatically adjust the output pictureClick to scaler the output pictureClick to select the input signal sourceNote: The signal source for the VGA input 6 and 7 can use."FW upgrade" pageClick to open FW file(file extension is ".fw")Display the FW file pathDisplaying the progress of the software upgradeClick to upgrade the Matrix softwareDisplay the message of the software upgradeClear the message of the software upgradeNote: The matrix after software upgrade required again to power supply.Connection and InstallationConnect up to 4 sources such as a Blu-Ray Player, game console, A/V Receiver, Cable or Satellite Receiver, etc. to the HDMI ,VGA or CV inputs on the unit. Insert and extract cables carefully with the power switch off. Connecting and disconnecting while the unit is powered can result in damage to circuitry.Connect up to four HD displays using the output ports(A-D) on the matrix.OPTIONAL:Connect the IR receiving extender to the IR EXT port on the matrix.OPTIONAL:Connect an Ethernet cable from the TCP/IP port on the matrix to a local Area Network.OPTIONAL:Connect an RS-232 cable from the RS232 port on the matrix.OPTIONAL:Connect the IR receiving extender to the IR INPUT port and the IR emission extender to the IR output port on the matrix.Connect the DC 12V Locking power supply to the power receptacle on the matrix.Connect the power supply to an available electrical outlet.